Ventura County, California is located within the climate zone, which also has the designation of #3C. The US Department of Energy has split the United States into eight zones to help in creating optimal building practices to achieve the most energy savings within homes.
Best Energy Saving Products
We've outlined a handful of building products that should be tailored for homes specifically in your California county. We detail the recommendations, how to interpret them, and then some of the more popular brands that meet or exceed those energy-saving standards.
Windows in Ventura County are expected to have a U-Factor of or less. The lower the U-Factor value of a window, the better it is at keeping heat inside the home.
The expected Solar Heat Gain Coefficient (SHGC) of windows installed in Ventura County should be equal to or less than . This value measures how well a product can resist unwanted solar heat gain, which is important in the warmer summer months.
Climate Zone
Window U-Factor
Skylight U-Factor
Glazed SHGC
Air Leakage
3C –
Any new or replacement window will be better at preserving energy than an old leaky one. Double paned windows with argon gas are the most energy efficient, but also the most expensive.
* Each product has various options that impact energy performance.
Exterior doors follow basically the same energy saving equirements as windows. In Ventura County, doors are expected to have a U-Factor of or less. The lower the U-Factor value of a door (or more specifically, it's windows), the better it is at keeping heat inside the home.
The expected Solar Heat Gain Coefficient (SHGC) of doors installed in Ventura County should be equal to or less than . This value measures how well a door's windows can resist unwanted heat gain, which is most important in the warmer summer months.
Climate Zone
Window U-Factor
Skylight U-Factor
Glazed SHGC
Air Leakage
3C –
Choosing the right exterior door for your specific location will help you conserve as much energy as possible.
[solar content]
The recommended R-values for attics in Ventura County should fall between R. Exterior walls are dependant on the size studs being used, but it is generally accepted that they should have a minimum of R15 to R19. The recommended flooring R-values of really only pertain to floors at or above ground level.
Climate Zone
Attics
2x4 Walls
2x6 Walls
Flooring
Crawlspaces
3C –
R
R
R
R
R
R-values for walls represent the sum of cavity insulation plus any sheathing if it exists. A combination of any insulation methods can be used to achieve the desired R-value. The minimum values set should be considered the bare-minimum, and customers should strive to reach maximum R-values for maximum energy savings.