Audrain County, Missouri

Home Building Efficiency Report

4A – Mixed Humid

Audrain County, Missouri is located within the Mixed Humid climate zone, which also has the designation of #4A. The US Department of Energy has split the United States into eight zones to help in creating optimal building practices to achieve the most energy savings within homes.

A mixed-humid climate is defined as a region that receives more than 20 inches (50 cm) of annual precipitation, has approximately 5,400 heating degree days† (65 °F basis) or fewer, and where the average monthly outdoor temperature drops below 45 °F (7°C) during the winter months.

† Heating Degree Days The degree-day measurement is the difference in temperature between the mean (average) outdoor temperature over a 24-hour period and a given base temperature for a building space, typically 65 °F. For example, if the mean temperature at a given location for January 3 is 35 °F, then the heating degree days measurement for that day is 30 (65 - 35 = 30).

Best Energy Saving Products

We've outlined a handful of building products that should be tailored for homes specifically in your Missouri county. We detail the recommendations, how to interpret them, and then some of the more popular brands that meet or exceed those energy-saving standards.

Windows in Audrain County are expected to have a U-Factor of 0.3 or less. The lower the U-Factor value of a window, the better it is at keeping heat inside the home.

The expected Solar Heat Gain Coefficient (SHGC) of windows installed in Audrain County should be equal to or less than 0.4. This value measures how well a product can resist unwanted solar heat gain, which is important in the warmer summer months.

Climate Zone	Window U-Factor	Skylight U-Factor	Glazed SHGC	Air Leakage
4A – Mixed Humid	0.3	0.55	0.4	≤5

Any new or replacement window will be better at preserving energy than an old leaky one. Double paned windows with argon gas are the most energy efficient, but also the most expensive.

Product	Type	Material	Installation	U-Factor*	SHGC*
E-Series	Casement, Double Hung, Awning, Bay, Gliding, Picture	Wood Interior, Aluminum Exterior	New, Replacement	0.27-0.26	0.16-0.41
Siteline	Casement, Double Hung, Fixed, Bay, Sliding, Awning	Wood, Clad-Wood	New, Replacement	0.18-0.47	0.18-0.67
Lifestyle	Casement, Double Hung, Picture, Awning	Wood Interior	New	0.29-	0.27-
Elevate	Casement, Double Hung, Bay, Awning, Picture	Wood Interior, Fiberglass Exterior	New	0.2-0.43	0.18-0.56
Impervia	Casement, Double Hung, Single Hung, Awning, Picture, Sliding	Fiberglass	New	0.27-0.43	0.26-

View All Windows »

* Each product has various options that impact energy performance.

Exterior doors follow basically the same energy saving equirements as windows. In Audrain County, doors are expected to have a U-Factor of 0.3 or less. The lower the U-Factor value of a door (or more specifically, it's windows), the better it is at keeping heat inside the home.

The expected Solar Heat Gain Coefficient (SHGC) of doors installed in Audrain County should be equal to or less than 0.4. This value measures how well a door's windows can resist unwanted heat gain, which is most important in the warmer summer months.

Climate Zone	Window U-Factor	Skylight U-Factor	Glazed SHGC	Air Leakage
4A – Mixed Humid	0.3	0.55	0.4	≤5

Choosing the right exterior door for your specific location will help you conserve as much energy as possible.

[solar content]

The recommended R-values for attics in Audrain County should fall between R38 to R60. Exterior walls are dependant on the size studs being used, but it is generally accepted that they should have a minimum of R15 to R19. The recommended flooring R-values of 25-30 really only pertain to floors at or above ground level.

Climate Zone	Attics	2x4 Walls	2x6 Walls	Flooring	Crawlspaces
4A – Mixed Humid	R38 to R60	R13 to R15	R19 to R21	R25 to R30	R25 to R30

R-values for walls represent the sum of cavity insulation plus any sheathing if it exists. A combination of any insulation methods can be used to achieve the desired R-value. The minimum values set should be considered the bare-minimum, and customers should strive to reach maximum R-values for maximum energy savings.

Product	Type	Material	R-Values*
Super TUFF-R	Board	Foam	2-13
Eco Kraft	Roll, Batt	Fiberglass	5-30
INS541LD	Loose Fill	Cellulose	13-60
Thermasheath	Board	Foam	3.2-31
Foamular	Board	Foam	3-10

View All Insulation Products »

* Each product has various options that impact energy performance.